Our Products
 UVC หลอดยูวีฆ่าเชื้อ
 หลอดยูวี / UV Curing System
 อินฟราเรด Infrared Shortwave
 อินฟราเรด ฮีตเตอร์ / Infrared Heater
 Omnicure Spot UV Bonding
 Electrodeless UV Fushion Lamp
 Special H.I.D. Lamp
 Reference (ผลงานที่เคยทำ)



Using the latest UV LED technology, the OmniCure® LX400+ spot curing system offers ultimate control and repeatability to save costs on assembly manufacturing processes, while ensuring consistent reliability and highest product quality. Also found in the OmniCure® LX400+ UV LED curing system, is our patented Intelli-Lamp® technology allowing users a greater degree of process assurance through real time UV LED temperature monitoring.

The LX400+ offers the ability to control up to four UV LED spot curing heads simultaneously or independently at different wavelengths: 365nm, 385nm and 400nm. The availability of different wavelengths addresses the requirements of a wide range of UV cured bonding adhesives.
NEW Features:
  • UV LED Spot Curing Head Temperature on Display
    Two Additional Foot Pedal Channel Control Configurations: FP5 and FP6
    • Channels 1 & 2 vs 3 & 4 simultaneously
      Sequential Exposure of Channels 1, 2, 3, and 4
OmniCure®'s patented Intelli-Lamp® technology monitors the temperature and operating hours of the UV LED spot curing heads to optimize a lifetime guarantee of 10,000 hours of operation or three years, whichever comes first.
OmniCure® LX400+ Features Benefits
Sequential Exposure of Channels 1, 2, 3, and 4 with the New Channel Configuration Mode FP6 NEW! Customized multi-phase curing processes directly from the LX400+ controller, without using an external control unit.
Uses the Latest UV LED Technology for Maximum Irradiance at Different Wavelengths: 
  • 9,500mW/cm² at 365nm
    12,400mW/cm² at 385nm
    9,000mW/cm² at 400nm
Reduction in UV assembly manufacturing costs with faster curing time and higher power efficiency while supporting a wide range of UV cured adhesives.
Precisely controls the UV Light Exposure Time (+/- 0.1 second) and Intensity Level (+/- 1%) of up to four Different UV LED Heads Consistent repeatability in UV curing assembly manufacturing processes for highest product quality.
Highly Efficient and Intelligent UV LED Spot Curing Heads with Extra Cooling Capability and patented Intelli-Lamp® Technology Maximum UV LED head power efficiency, long term reliability and guaranteed lifetime.
High Energy Efficiency from using the latest LED Technology Approximately 75% less energy consumption than a typical UV arc lamp curing system.
Controls up to 4 UV LED Spot Curing Heads simultaneously or independently using a single controller Versatility in production setup for running up to 4 UV curing heads simultaneously or independently.
LED Head Temperature on Display NEW! Optimum efficiency in UV curing manufacturing processes while extending UV LED head lifetime.
Autonomous and Robust UV Curing System with Compact Dimensions Highest performance in dense and harsh manufacturing environments; no additional cooling required.
Certifications & Safety Standards Compliance with CE and RoHS requirements.
User-friendly front panel control Ease of use for quick system set-up in a matter of minutes.

© copyright , 2013. Engine by MakeReadyWeb.com All rights reserved.